CW/Biss question

#1
Here's a constant.cw question (I'm playing about with different set up at moment) Tonight's 3 x feeds all use the same SID & PMT PID, so what additional parameters are required to enable the feeds to clear?.

If I set one at a time, no problem, but if I add all 3 at the same time, only the 1st one clears.

Cheers

2600:000000:0001:0020:1FFF::35 73 57 FF 75 37 53 FF 35 73 57 FF 75 37 53 FF ; Wolves v Palace [Ok]

2600:000000:0001:0020:1FFF::44 11 11 66 19 63 69 E5 44 11 11 66 19 63 69 E5 ; Chelsea v Saints - Not clearing

2600:000000:0001:0020:1FFF::33 39 65 D1 22 28 65 AF 33 39 65 D1 22 28 65 AF ; Huddersfield v Burnley - No clearing
 

manic01

Time at the bar please.
#2
This is non linux section I take it you are using linux?
Not my bag to be honest be better off asking in linux section or elsewhere sorry.
All works on 5402 ok and a lot easier straight forward 16 digits lol
 
#4
This is non linux section I take it you are using linux?
Not my bag to be honest be better off asking in linux section or elsewhere sorry.
All works on 5402 ok and a lot easier straight forward 16 digits lol
Thanks. Just playing about with a new box. Still have 5402 and agree, BISS feeds by far the easiest on that!
 

digi247

Well-Known Member
#5
You hit the nail on the head: same SID & PMT PID

as linux is basically an opertaing system and so reads which ever line comes first if the following lines are the same these are ignored, It's not something i have ever encountered a solution too. Sat Universe would probably have a better idea
 

mdt

Well-Known Member
#7
Most feeds use Sid 1 as they are received via professional single channel rack receivers and are not for public use. When a Linux stb has multiple sids or fixed constant cw keys in the softcam it will select the first one in the list.