NEW TM-TWIN 4K Twin Tuner 4K UHD Satellite Receiver

manic01

The fat lady has sang!
#1






Price: £189.99
FREE Express Delivery

http://www.technomate.com/store/products/TM%2dTWIN-4K.html


Highlights
  • 4K2K UHD, 1080p & True 3D
  • 2x HD Satellite (DVB-S2) Tuners + optional second tuner (DVB-T2/C)
  • 1.7GHz Dual-Core ARM Broadcom BCM 7252S CPU
  • 4GB Nand Flash, 2GB DDR4 RAM
  • Linux Open Embedded, H.265
  • Internal 2.5” SATA3 Hard Disk Drive Support, 2x USB 3.0 Ports
  • Picture-In-Picture (2 HD PIP)
  • 1x Smart Card Reader & 1x Common Interface
  • Gigabit Ethernet Port

  • Fully MPEG-2, MPEG-4 AVC, H.264 & H.265/HEVC Compliant
  • 2x HD Twin Satellite (DVB-S2) Tuners (also available: S2 + Twin C or T2 Lite options)
  • 1.7GHz Dual-Core ARM Broadcom BCM 7252S CPU
  • 12K DMIPS
  • 4GB Nand Flash, 2GB DDR4 RAM
  • Linux Open Embedded
  • Output Resolution: 4K2K UHD 2160p HDR, Full HD 1080p, 1080i, 720p, 576p, 576i & True 3D
  • 1x Smart Card Reader
  • 1x Common Interface (CI)
  • HDMI 2.0
  • Hardware Transcoder
  • Picture-In-Picture (2 HD PIP)
  • Dolby Digital Plus compliant via optical S/PDIF output
  • Internal 2.5” Hard Disk Drive Support (SATA 3)
  • 2x USB 3.0 Ports
  • Gigabit Ethernet Port
  • Universal remote
  • Record up to 7 channels at the same time (on two different transponders)
  • Temperature & Speed Controlled Fan
  • Unlimited Channel Memory
  • Super sensitive tuner for very weak signals and weak transponders
  • Less than 1 second channel change
  • DiSEqC 1.0, 1.1, 1.2 & 1.3 (USALS) compatible
  • Extended EPG and programme reservation on EPG
  • Support for multiple audio language broadcasts
  • Supports PAL/NTSC systems
  • Parental Control
  • SCPC & MCPC receivable from C/Ku band satellites LNBs supported: Universal, Single, Single S & C band wideband LNBs
  • 4:3 & 16:9 screen formats
  • Timer & multi-event timer functions
  • Automatic FEC and PID detection and manual entry of PID values
  • Real time clock
  • Teletext & Subtitle support by OSD and VBI
  • LNB short circuit protection onboard
  • 1W Standby power consumption option



Running Broadcom's latest CPU, the 1.7Ghz Dual Core lightning processor is 4x faster than the previous generation, making booting, channel changing and applications run a lot quicker! Booting time from power off takes less than 25 seconds, up to 4x faster than previous models. From Standby to on, it is instant.

With the TM-TWIN 4K, you can watch satellite channels in glorious Ultra High-Definition (UHD) with HDR, 4K 2160p with Dolby Digital Plus to give you a superior audio experience. It’s also True 3D ready ensuring compatibility with future 3D formats.



The latest USB 3.0 ports are up to 10x faster than the previous generation of USB 2.0, allowing you to read/write data a lot quicker.

It is an Open Embedded satellite receiver which has access to plenty of Third Party applications giving you a lot more features and plugins than a standard satellite receiver.

Want to know what's happening on another channel at the same time? Now you can. With HD Picture-In-Picture (PIP), you can view 2 HD channels at the same time!

The Gigabit Ethernet Port allows data to transfer up to 10x faster than standard Ethernet Ports allowing faster streaming, file transfers, downloading/uploading...and more!



Not leaving the Standard Definition (SD) channels behind, we’ve developed a built-in hardware 4K Upscaler to improve the picture quality of Standard Definition (SD) channels via the HDMI output, scaling the output to up to 4K resolution.



You can use a USB Hard Disk Drive (HDD) or an internal 2.5" Hard Disk Drive to record all your favourite channels, listen to your music and watch a slideshow of your photos. Supporting the latest SATA-3 connection allowing up to 6Gb/s, twice as fast as SATA-2, hard drive performance has never been this fast (requires SATA-3 compatible HDD)!

The advanced CPU allows you to record up to 7 channels at the same time (on two different Transponders).

The silent temperature and speed controlled fan cools the TM-TWIN 4K only when needed and the speed level can also be adjusted.



It’s even Eco-friendly with 1W standby power consumption.
 
#6
I followed up on this new STB with technomate looking for a 2x HD Satellite (DVB-S2) Tuners + optional second tuner (DVB-T2) making this a 3 tuner stb but they have indicated that there is only a 1x HD Satellite (DVB-S2) Tuner + 2x DVB-C Tuners available
there will be a 2x HD Satellite (DVB-S2) Tuners + tuner (DVB-T2) available but not sure when. I have called them twice and everyone gives you a different variation
Anyone advise on this
 

manic01

The fat lady has sang!
#7
Only been told of these 2 versions, from the horses mouth so to speak.
1-tm-twin-4k- 2 satellite tuners

2-tm-twin-4k-S/2C>>twin cable tuner one satellite

I will ask if any any new options are becoming available.
 
#8
Thanks manic01 may be l missuderstood the highlight in the thread "2x HD Satellite (DVB-S2) Tuners + optional second tuner (DVB-T2/C)"
will, await your findings
 
#10
Yes thats what they indicated to me. i think l will wait and see if a 2x HD Satellite (DVB-S2) plus (DVB-T2) becomes available. Been monitoring for while and thought this 4k was what l was looking for
 

rumpole

Active Member
#13
i dont have a 4k box but from what i have read you can
only use mgcamd and oscam they are the only two cams it reads
i'm sure if i'm wrong 4k users will correct my post
 

kegnkiwi

Active Member
#14
oscam, and mgcamd on some images, ncam which is a varient of oscam but i think for powervu. and wicard. There may be some others too.
 

kegnkiwi

Active Member
#15
I think what is needed is a good working set of configs for oscam posted on here. Then its just a simple matter of coverting a line to oscam via the convertor tool and then copy and paste it into oscam.server. When I first got my 4k box it took a little time to get the correct configs which where glitch free but I use the same ones for each image and its a 5 minute job of setting up.
 
#16
Just got hold of this receiver and two annoying issues already: CCAM not supported (managed to get lines put into OSCAM) and no wireless dongle will connect! I have the NANO Twin version of this and the wireless dongle works no problem. Anyone else have this issue trying to get the dongle to connect? Box recognises dongle and picks up wireless network but refuses to connect!
 
Last edited:
#18
I think what is needed is a good working set of configs for oscam posted on here. Then its just a simple matter of coverting a line to oscam via the convertor tool and then copy and paste it into oscam.server. When I first got my 4k box it took a little time to get the correct configs which where glitch free but I use the same ones for each image and its a 5 minute job of setting up.
yes, I have sorted the issue with the clines using an online OSCAM converter tool all seems ok. Is there any way of checking all the clines have uploaed? More annoying is the wireless dongle issue!