tm nano se plus 2/biss

Discussion in 'Technomate (linux) Receivers Disscussion' started by mb2410, Dec 26, 2017.

  1. mb2410 Member

    am i right in saying that you can add biss key to this reciever,ive got oscam set up and running (after a bit of a struggle} lol,so do i input the same way and paste in constant.cw like i did when i did cccam ....any advice would be gratefull please,,,,,,ive managed all major aspects so dont want to mess up oscam by doing something not quit right
  2. digi247 Well-Known Member

    you will need to add a constant.cw as a reader first in oscam and then add the file with the keys included for oscam to read it
    mb2410 likes this.
  3. mb2410 Member

    Thanks for that ive added constant.cw in oscam
    Its just for 7e feeds in biss ie footy mate
    Thanks again for your help
  4. ross_37 Member

    I am looking to add a constant.cw to oscam for BISS codes on BBC satback 27.5w can you advise on the format of the file
    I have searched on line and see different formats i.e. caid, provider, sid , key?
    mb2410 likes this.
  5. mb2410 Member

    Hi ive got my constnant.cw in and running but am really struggling with complete format like your self but if anyone has a simple example of format it would really be of help
    As i must be doing something wrong somewhere
    Thanks all
  6. ross_37 Member

    Hi the example l am looking at for BBC satback 27.5w is-
    The format l found is caid: provider: sid: pmt: key:
    I found an example as indicated
    2600:000000:1044:0064:1FFF:: D5 81 F9 4F 24 11 2D 62 D5 81 F9 4F 24 11 2D 62 ;BBC One England (27.5°W)

    but l cant relate the "1044:0064:1FFF" element?
  7. mb2410 Member

    caid=2600:000000:1044:0064:1FFF::
    ident=D5 81 F9 4F 24 11 2D 62 D5 81 F9 4F 24 11 2D 62 ;BBC One England (27.5w)
    thats what i believe to be the case but i dont seem to be able to get it right
    so someone correct me if ive not got it right please
    as i probably got something wrong somewhere
  8. ross_37 Member

    I think l have sorted it but not tested it
    caid: provider: sid: pmt: ecm: key: Channel name
    caid (2600) provider (000000) sid (4164) PMT (100) ECM not sure about this but all the channels end with 1FFF Biss key
    D5 81 F9 4F 24 11 2D 62 D5 81 F9 4F 24 11 2D 62 ;channel name (BBC One England (27.5°W))
    2600:000000:1044:0064:1FFF:: D5 81 F9 4F 24 11 2D 62 D5 81 F9 4F 24 11 2D 62 ;BBC One England (27.5°W)

    I took the king of sat info for intelsat 907 and converted sid (4164) PMT (100) to hex 1044:0064
    the key is entered twice similar to the 5402 m3
    I am sure that some one with greater knowledge will correct this explanation
  9. squirepete

    CAID= 0x2600 SID= 0x1044 VPID= 0x0065 APID= 0x0066 PMT= 0x0064 PCR= 0x0065 TID= 0x1000 NID= 0x0001 ProvID= 0x000000 ECM PID= 0x1FFF

    I Think?
    Last edited: Jan 9, 2018
  10. mb2410 Member

    Hi all
    ive oscam setup but ive still one bugging issue to sort ive input osemu-biss into oscam.server and put cw xxxxxxxxxxxxxxxx for tonights match into softcam.key file in constant cw restarted through webif and got game for about 5 seconds then it went off
    so my question is ,is it my config or have i got softcam key in wrong place,at the moment its in usr/keys file
    any help would be appreciated from members please i,m using r10659 at the moment and its saying its connected and the reader has started to do its thing is this the right procedure and is this the right file oscam_pli
    thank you
    Last edited: Jan 10, 2018
  11. ross_37 Member

    I have brought my TM-Nano m3 to the Algarve and trying to setup BBC Satback. I have OSCam r11398 and CCCam 2.3.0 available

    I have scanned and received all the channels but I am a little confused when setting up biss keys for use under oscam. I have created a SoftCam.Key file and loaded it /etc/tuxbox/config

    An example for a BBC One HD channel :-

    “F 0001448419C9 00 D5 81 F9 4F 24 11 2D 62 D5 81 F9 4F 24 11 2D 62 ; BBC One HD (27.5W)”


    But this is not clearing to show BBC One HD when using OSCAM

    On some example l see the use of caid 2600 in the softCam key file

    “2600:000000:4484:19C8:1FFF::D5 81 F9 4F 24 11 2D 62 D5 81 F9 4F 24 11 2D 62 ;BBC One HD (27.5°W)”


    I have also tried the CCCAM method and created a constant.cw file /usr/keys/constant.cw

    The example of the file for BBC One HD is-

    “F 44841FFF 01 D581F94F24112D62 ;BBC One HD (27.5°W)”

    Can anyone help me to understand the BISS keys opening the channel BBC One HD and other channels. The constant.cw /softcam.key file have been created in wordpad text document format
  12. digi247 Well-Known Member

    Hi Ross,

    Firstly what image are you using on the Nano as this determines where the keyfile will go, Also standard Oscam cannot read a softcam.key file you need an Oscam Emu version for this.

    Standard oscam will read a constant.cw file but you need to create a reader in the reader section of oscam.

    i would also advise deleting all keys out of the file except for the BBC-Satback ones this will rule out any miss-reads from the file itself

    CCCam should work without a problem

    Guide HERE https://linuxsat-support.com/thread/115633-27-5-west-guide/

    regards
    Last edited: Jun 5, 2018
    ross_37 and manic01 like this.
  13. ross_37 Member

    Hi digi247
    Thanks for your response. I am using Openvix 5.1.27 release and in the OSCAM file/server l have
    [reader]
    label = biss
    enable = 1
    protocol = constcw
    device = /etc/tuxbox/config/SoftCam.Key
    caid = 2600
    group = 1

    and in the oscam status indicates connected
    I have not done anything with lamedb but as indicated i converted the SID and VIPD to hex in “F 44841FFF 01 D581F94F24112D62 ;BBC One HD (27.5°W)” I need to review the link further in your response
  14. ross_37 Member

    I looked at the link and I have progressed to get BBC One HD working by entering the the extra parameters in Dreamboxedit together Video and PCR.
    I am trying to work out how the extra parameters are generated "c:050001,c:1219ca,C:2600,f:4" as with ITV HD the extra parameters work but have subtitles on the screen
  15. manic01 Welcome to the final show

    Oh for a simple TM5402 M3 that does all that for you lol
    FREEDAWEED likes this.
  16. FREEDAWEED Active Member

    Oh for a simple person that has all the files to make it work, Oh i am that simple person.
  17. manic01 Welcome to the final show

    Don't show off, just post em lol
    Also TM5402 etc always easier for cw/biss etc.
    FREEDAWEED likes this.
  18. FREEDAWEED Active Member

    OOOooooo manic01. I love it the way you get me posting. All charm lol.
    Here is a file that has a softcam key file for CCcam that goes in user keys. For CCcam
    Also it has a file with the Oscam key file for Oscamymod 18-56 that goes in etc/tuxbox/config. For Oscam
    Finally there's a modified Lamedb with all the channels on 27.5W (modified without subs except there is a film4+1 with them added) and all that i can receive on 28.2E from South Spain. (sorry you'll have to edit it in word or something).
    Don't forget you have to stop the box using telnet init 4 and init 3 when changing the lamedb or it may not work.

    Attached Files:

    manic01 likes this.
  19. manic01 Welcome to the final show

    Good man, thanks.
    FREEDAWEED likes this.
  20. ross_37 Member

Share This Page